Foshan Nanhai Yuhua Hardware Products Co., Ltd.
Make Chinese brands famous all over the world Foshan Nanhai Yuhua Hardware Products Co., Ltd.
Add to Cart
AISI Corrugated Stainless Steel Railings Pipe Moulding SS304L SS316L Erw
Clean Stainless Steel with Dish Soap and Water
A little bit of dish soap and some water take care of any greasy fingerprints or residue on stainless steel appliances:
In a small bowl, mix a few drops of dish soap with warm water.
Dip a microfiber cloth into the mixture.
Wring out the cloth so it’s damp, not saturated.
Work from top to bottom. That way, any drips are cleaned up as you go.
Wipe in the direction of the grain with firm strokes. This should remove grime, grease and fingerprints.
Rinse the cloth well, getting out all the soap.
With a rinsed or different cloth, wipe the appliance down again with just water. Go with the grain of the stainless steel to avoid streaks.
To finish, take a dry microfiber towel and wipe it down again. Again, go with the grain.
Steel Hanging Rail Specification
| Name | AISI Corrugated Stainless Steel Railings Pipe Moulding SS304L SS316L Erw |
| Items | 201/304/316L STAINLESS STEEL PIPE |
| Standard | ASTM A554 |
| Material Grade | 201: Ni 0.7%--1% |
| 304: Ni 8%, Cr 18% | |
| 316L:Ni10%,Cr16% | |
| Outer Diameter | 20mm |
| Thickness | 0.24mm |
| Length | 6m, or as customers' request |
| Tolerance | a) Outer Diameter: +/- 0.2mm |
| b) Thickness: +/- 0.03mm | |
| c) Length: +/- 5mm | |
| Surface | annealing,pickling |
| sandblasting | |
| Application | industry,exhausting,welding,furniture,window |
| Test | Squash test, extended test, water pressure test,heat treatment, NDT |
Elemental comparison of the different materials
| Chemical Composition of Material | Material | 201 | 316L | 304 |
| C | ≤0.15 | ≤0.035 | ≤0.08 | |
| Si | ≤1.00 | ≤1.00 | ≤1.00 | |
| Mn | 5.5-7.5 | 2 | ≤2.00 | |
| P | ≤0.06 | ≤0.045 | ≤0.045 | |
| S | ≤0.03 | ≤0.03 | ≤0.03 | |
| Cr | 16-18 | 16-18 | 18-20 | |
| Ni | 3.5-5.5 | 10-14 | 8-11 | |
| Mechanical Property | Material Item | 201 | 202 | |
| Tensile Strength | ≥535 | ≥520 | ||
| Yield Strength | ≥245 | ≥205 | ||
| Extension | ≥30% | ≥30% | ||
| Hardness (HV) | <253 | <253 |
